Aquila Drilling

Aquila Rig #3 OIME PARCO S/L 7

(Working in West Texas)

MAST & SUB:

ONE (1) PARCO SL-7, 136’ x 750,000 LB STATIC HOOK LOAD MAST, RACKING BOARD & 6 SHEAVE CROWN BLOCK, FASTLINE SHEAVE, STANDPIPE AND BOOM POLES.

PARCO 21’ SPLIT LEVEL (17’ ROTARY CLEARANCE) SUBSTRUCTURE, V-DOOR, STAIRS, HANDRAILS, WITH NATIONAL TYPE D WIRELINE ANCHOR.

8’W X 8’H X 32’L TOP DOGHOUSE, DRILLER LOCKERS, STORAGE BOXES, KNOWLEDGE BOX, 2 DOORS

ONE (1) 18”H X 9’-3”W X 60’L CATWALK WITH EIGHT (8) 18” PIPE RACKS

ONE (1) 39”H X 8’W X 46’L JUNK BOX WITH WOODEN FLOOR

DRAWWORKS:

ONE (1) OIME (PARCO) SL-7 SINGLE DRUM DRAWWORKS, 1-1/4” LEBUS GROOVED DRUM WITH PARMAC 342 HYDROMATIC BRAKE. OIME CW SL-7, FOSTER MAKE-UP AND BREAK-OUT CATHEADS

ROTARY:

ONE (1) IDECO 275-K, 27-1/2” X 53-1/4” ROTARY TABLE WITH MASTER BUSHING

HOOK & BLOCK:

GARDNER DENVER TWW-40 400 TON CAPACITY, UNITIZED WITH WEB WILSON 350 TON HYDRA-HOOK, SIX (6) 1-1/4” X 50” SHEAVES

CROWN:

ONE (1) PARCO CROWN WITH (7) – 1-1/4” X 50” SHEAVES

SWIVEL:

ONE (1) NATIONAL MODEL P-500, 500 TON ROTARY SWIVEL

TRIPLEX MUD PUMPS:

ONE (1) NATIONAL MODEL 10-P130, 1,300 HP TRIPLEX PUMP WITH HYDRILL MODEL K-20, 5,000 PSI PULSATION DAMPERNER, POWERED BY TAIL DRIVE OFF DRAWWORKS

ONE (1) NATIONAL MODEL9-P100, 1,000 HP TRIPLEX PUMP WITH HYDRILL MODEL K-20, 5,000 PSI PULSATION DAMPERNER, POWERED BY CATERPILLAR 3508TA 1000 BHP ENGINE

GENERATORS DIESEL / AC:

THREE (3) CATERPILLAR MODEL3412T, 12 CYLINDERS 700 BHP ENGINES WITH ALLISON CLT 6061-4 SIX SPEED TRANSMISSIONS

UTILITY HOUSE:

ONE (1) UTILITY HOUSE, 11’W X 9’H X 40’L WITH ELECTRICAL CONTROL SYSTEM WITH TWO (2) CATERPILLAR 3412T ENGINES WITH GE 420 KW GENERATORS FOR LIGHT PLANT OPERATION, AND TWO (2) SULLIVAN-PALATEK 30 HP AIR COMPRESSORS AND HORIZONTAL RECEIVER TANKS

FUEL TANKS:

ONE (1) CYLINDRICAL, HORIZONTAL 9,000 GALLON FUEL TANK AND LUBRICATION TANK, OILFIELD SKID MOUNTED, POWERED BY (2) 2 HP FUEL TRANSFER PUMPS

WATER TANKS:

ONE (1) 500 BBL HORIZONTAL OPEN TOP WATER TANK, OILFIELD SKID MOUNTED, WITH (2) 2” X 1-1/2” CENTRIFUGAL PUMPS WITH 25 HP ELECTRIC MOTORS

MUD SHAKER TANK:

ONE (1) MUD SHAKER TANK, 320 BBL, 10’W X 6’H X 30’L FLAT BOTTOM, THREE (3) COMPARTMENT TANK WITH AN 11’ PORCH WITH TWO (2) 8” X 6” CENTRIFUGAL PUMPS WITH 75 HP ELECTRIC MOTORS, AND ONE (1) BRANDT MA 7.5 HP AGITATOR ON OILFIELD SKID

MUD INTERMEDIATE TANK:

ONE (1) MUD INTERMEDIATE TANK, 425 BBL, 10’W X 6’H X 40’L FLAT BOTTOM TANK, INTERNAL PLUMBING, MUD JETS WITH ONE (1) BRANDT 7.5 HP MUD AGITATORS AND ONE (1) LIGHTNIN 7.5 HP MUD AGITATORS ON OILFIELD SKID

MUD SUCTION TANK:

ONE (1) MUD SUCTION TANK, 480 BBL, 10’W X 6’H X 30’L FLAT BOTTOM, THREE (3) COMPARTMENT TANK WITH INTERNAL PLUMBING AND MUD JETS WITH AN 11’ PORCH WITH TWO (2) 8” X 6” CENTRIFUGAL PUMPS WITH 75 HP ELECTRIC MOTORS, AND THREE (3) BRANDT MAX 2000 7.5 HP MUD AGITATORS ON OILFIELD SKID

DESILTER / DESANDER / SHAKER:

(1) BRANDT KING COBRA, SINGLE, LINEAR SCREEN SHALE SHAKER

(1) BRANDT DESANDER WITH (2) 12” CONES

(1) BRANDT MODEL SE-12 CONE DESILTER WITH (12) 4” CONES

BLOW OUT PREVENTION EQUIPMENT:

SHAFFER 13-5/8” X 5,000 LB BOP WITH 5” PIPE RAMS, 6-1/4” COLLAR RAMS

13-5/8”-5,000 LB ANNULAR

SHAFFER MODEL 14080-3S CLOSING UNIT

BURNSCO CHOKE MANIFOLD

TUBULARS:

26 – 6-1/4” X 2-13/16” SPIRALED DRILL COLLARS WITH SLIP & ELEVATOR RECESSES, 4-1/2” IF CONNECTIONS

2 – 8” SPUD COLLARS